How To Program Honda Civic Keyless Entry Remote Control

Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work.You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.Note: a maximum of 3 remote transmitters can be programmed.Make sure all the doors are UNLOCKED before starting this programming procedure.1. Turn ignition switch to ON (II)2. Press the LOCK or UNLOCK button on one of the remotes.

How To Program Honda Civic Keyless Entry Remote Control Key Chevrolet Equinox Start Car

(An unprogrammed remote can be used for this step.)3. Turn ignition switch to ACCESSORY (I) or LOCK (O)4. Turn ignition switch to ON (II)5.

Press the LOCK or UNLOCK button on one of the remotes.6. Turn ignition switch to ACCESSORY (I) or LOCK (O)7. Turn ignition switch to ON (II)8. Press the LOCK or UNLOCK button on one of the remotes.9. Turn ignition switch to ACCESSORY (I) or LOCK (O)10.

Turn ignition switch to ON (II)11. Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.12.Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.13.Turn the ignition switch to LOCK (O) to exit programming mode.14. Test remote(s) 2015-09-24.